Qeridoo GmbH
Industriepark Nord 100
53567 Buchholz, Deutschland
Telefon: +49 (0)2683 9451925 (Hotline:
Mo.–Do.
09:00–12:00 und 14:00–16:00 Uhr)
Fax: +49 (0)2683 9466577
E-Mail: info@qeridoo.de
Website: www.qeridoo.de
Product designation
Polygon adapter Giant M10 x 1.5
Item numbers
Product description
The stainless steel polygon adapter allows the coupler to be securely attached to Giant, Liv, and Momentum bikes and prevents twisting thanks to its anti-twist function.
Intended use
The product is intended exclusively for use with Qeridoo products. Check compatibility with your Qeridoo in advance.
Improper use
The product is not a children's toy and must not be used as one. Do not use the product on bikes that are not suitable for pulling trailers.
Technical data
- Material: stainless steel
- Dimensions: 2.2 x 1.9 x 2.6 cm
- Recommended tightening torque: 25 Nm
- Weight: 0.51 kg
When using accessories, their weight must be deducted from the payload. The empty weight of the Qeridoo with installed accessories plus payload must not exceed the permissible total weight. According to StVZO (Road Traffic Licensing Regulations | valid in Germany), a maximum total weight of 40 kg applies to unbraked trailers.
A torque wrench (0–50 Nm) with 13 mm and 19 mm adapters is required for assembly.
This adapter is not suitable for bikes with carbon frames, carbon dropouts, or carbon rear frames (risk of breakage!).
Safety and warning instructions
WARNING!
- The tightening torque is based on your bike manufacturer's information. The values for polygon adapters are guide values – the weakest component is always decisive (e.g. dropout or axle thread). Use a calibrated torque wrench whenever possible. After your first rides, you should check the clamping force and retighten if necessary. Do not use tools that have come into contact with ordinary steel – even the smallest steel particles can be transferred and cause contact corrosion. Due to the design of the coupler, slight scratches or abrasion marks may occur at the contact point with the bike frame. This is due to technical reasons and is not grounds for a complaint.
- Tighten the polygon adapter to 25 Nm. The screw that is then screwed into the adapter is tightened to 30 Nm. To prevent the polygon adapter from tightening further, counter it with an open-end wrench.
DANGER!
- Correct assembly of the adapter is crucial for safe trailer operation. Improper attachment can come loose while riding, with potentially serious accident consequences. If you are unsure, have assembly carried out by a qualified workshop. Compatibility must be checked before assembly. This adapter is not suitable for bikes with carbon frames or carbon rear frames (risk of breakage!).
Care and storage instructions
- Clean after use and store in a dry place
- Do not expose permanently to moisture or aggressive chemicals
- For cleaning, use only water and standard household care products, such as dish soap and textile care products, or soft cloths
- Keep out of reach of children
Conformity & Safety
This product was developed and manufactured in consideration of applicable EU safety requirements. The materials used comply with the relevant safety and quality standards.
Manufacturer information
Qeridoo GmbH
Industriepark Nord 100
53567 Buchholz, Germany
www.qeridoo.de
Email: info@qeridoo.de
Fax: +49 (0) 2683 9451925
