Product name
Solid axle adapter 3/8 x 26
Item numbers
Product description
The solid axle adapter lets you attach the becco tow bar easily and safely to bicycles with solid axles or hub gears.
Intended use
The product is intended exclusively for use with Qeridoo products. Check compatibility with your Qeridoo in advance.
Improper use
The product is not a children’s toy and must not be used as one. Do not use the product on bicycles that are not suitable for towing trailers.
Technical data
- Material: stainless steel
- Dimensions: 2,1 x 2,1 x 3,9 cm
- Thread: 3/8 x 26
- Recommended torque: 30 – 40 Nm
- Weight: 0,050 kg
When using accessories, these must be deducted from the payload. The empty weight of the Qeridoo with installed accessories plus payload must not exceed the permissible total weight. According to StVZO (German Road Traffic Licensing Regulations | valid in Germany), a maximum total weight of 40 kg applies for unbraked trailers.
A torque wrench (0–50 Nm) with a 17-mm adapter is required for assembly.
This adapter is not suitable for bicycles with carbon frames, carbon dropouts, or carbon rear frames (risk of breakage!).
Safety and warning instructions
WARNING!
- The tightening torque depends on your bicycle’s manufacturer information. The values for becco adapters are guidelines – the weakest component is always decisive (e.g., dropout or axle thread). Use a calibrated torque wrench whenever possible. The adapter must be screwed onto the axle by at least six full thread turns to ensure secure clamping. After the first rides, you should check the clamping force and retighten if needed. Do not use any tool that has come into contact with ordinary steel – even the smallest steel particles can transfer and cause contact corrosion. Due to the design of the coupler, slight scratches or abrasion marks may occur at the contact point with the bicycle frame. This is technically unavoidable and is not grounds for a complaint.
DANGER!
- Professional assembly of the solid axle adapter is essential for safe trailer operation. Improper attachment can come loose while riding, with potentially serious accident consequences. If you are unsure, have the assembly carried out by a qualified workshop. Compatibility must be checked before assembly. This adapter is not suitable for bicycles with carbon frames, carbon dropouts, or carbon rear frames (risk of breakage!).
Care and storage instructions
- Clean after use and store dry
- Do not expose permanently to moisture or aggressive chemicals
- For cleaning, use only water and standard household care products such as dishwashing detergent, textile care products, or soft cloths
- Keep out of the reach of children
Conformity & Safety
This product was developed and manufactured in compliance with the applicable EU safety requirements. The materials used meet the relevant safety and quality standards.
Manufacturer information
Qeridoo GmbH
Industriepark Nord 100
53567 Buchholz, Germany
www.qeridoo.de
Email: info@qeridoo.de
Fax: +49 (0) 2683 9451925
